Overview:
CROWN MK-600
-
8 ohms stereo RMS power; 2 x 600 w
-
4 ohms stereo RMS power; 2 x 900 w
-
2 ohms stereo RMS power; 2 x 1500 w
-
8 ohms bridged RMS power; 1800 w
-
4 ohms bridged RMS power; 2700 w
-
THD (1kHz, -10dB, 4Ω): <0.03%
-
Frequency Response (0/-3dB, 1W, 8Ω): 5Hz-60KHz
-
Sensitivity: 0.775V/1.0V/1.4V
-
Signal Noise Ration (20Hz-20KHz): >105dB
-
Damping Coefficient (10-100Hz, 8Ω): >300
CROWN MK-1000
-
Power Requirements: Ac180v-250v
-
Structure: 2u Metal Case Design
-
Channel: 2ch
-
Stereo 2 Ohm: 2x2500w
-
Stereo 4 Ohm: 2x1500w
-
Stereo 8 Ohm: 2x1000w
-
8 Ohms Bridged: 3000w
-
4 Ohms Bridged: 4500w
-
THD (1khz, -10db, 4ohms): <0.03%
-
Frequency Response: 5hz-60khz
-
Sensitivity: 0775v/1.0v/1.4v
Features:
- Stereo (dual-channel), parallel input, Or bridged mono operating Modes
- Stereo/parallel/bridge mode selection switch
- Balanced inputs, both XLR male and female
- Binding post and Neutrik Speakon / Outputs / Detented gain controls
- Front panel LED indicators for protect/clip/signal inputs
- Minimum load impedance: STEREO 2 Ohm BRIDGE 4 Ohm
- Protection: Overload, Overheat, Output short circuit
- Power up relay, preventing electric current
- With Lifetime Service Warranty
