Fujifilm Instax Wide Black Film for 10 Sheets Single Pack for Instant Camera

Specification

• Black Border
• 4.2 x 3.3" Prints
• ISO 800/30°
• Daylight-Balanced Film
• Glossy Surface Type
• Vibrant Colors and Natural Skin Tones
• Excellent Sharpness and Grain Structure

What's in the Box
Fujifilm Instax Wide Black Film

INSTAX SQUARE Instant Film Care
See FUJIFILM INSTAX Instant films pack use instructions. 

 Frequently Ask Questions (FAQs about Instax Film): 

Q: What's the best way to store my instax film?
● We suggest keep the prints away from direct sunlight and humid conditions. Keep the prints in an album within a ventilated cool dry area for maximum longevity.

Q: My film is coming out blank / white, what's the reason?
● This is usually caused when the film door on the camera or printer has been opened after film has been loaded into the camera or printer. Instant film is light sensitive, so should only be exposed to light when a picture is taken, not before. If this has happened, you may find that if you keep shooting with that pack of film the first few shots will come out blank but some of the remaining film should come out as normal. This will be as the film further back in the film cartridge did not get fully exposed to light. Obviously this will depend on how long and how intense the light was when the film was exposed.

Q: When I take a picture of the sun it develops as a black spot. Is my film faulty?
● If you take images of a scene that has a very bright element such as the sun, it will overexpose that part of the film. This will result in a little black mark shown on the film. This is normal, but to avoid, do not shoot directly into the sun or bright light source. If you really want to capture the sun in your image or similar, you can try holding some sunglasses over the lens whilst shooting as this can help reduce the chance of overexposure.

Q: My film gets jammed when ejecting from the camera
● This would usually be due to low battery power as the majority of power would go into ejecting the film. While there may have been enough power to capture the image, the camera halted while pushing the film through the unit. Replace the batteries with the lens in the open position.

Q:How do I insert the instax film into my instax product?
● After removing the film from the foil wrapper you will notice a small yellow stripe on the top right hand side of the cartridge. If you open your camera/printer back you will see the same yellow mark on the top right hand corner of the film compartment, simply align these two stripes and the film cartridge should slot in place easily. Never force the film into your product as this could damage the film and/or product.

Q: Why has my film not developed properly?
● Once a picture has been taken it takes around 90 seconds to develop, during this time it is important you don't crease, squeeze or shake the film. These types of actions can affect the distribution of film chemicals whilst the film is developing creating artefacts to your shots. Of course, some users do this for creative effect!