Overview:
- Ethernet Continuity Test - Analyze CAT5 CAT6 (STP & UTP) line faults, such as normal, open circuit, short circuit, and cross, and see the results instantly.
- Measure Cable Length Accurately - Measure the network cable in the range of 2.5m-500m.
- Port Blink Test - Identify the network port by the blinking port light on the Hub or Switch. Available to 10M/100M/1000M Hub/ switch.
- PoE Testing - Identify which pins are providing power and detect how much voltage, and identify which type of PSE (AT/AF standard)
- Work Safely - Non-Contact Voltage (NCV) tester detect AC voltage (70V-1000V) without disrupting the electrical system, providing you with maximum safety and convenience.
Specifications:
● [Network cable scanning] Three scan modes selectable: Digital model/ Analog mode/ PoE mode.
● [Cable continuity testing] Test physical status for STP, UTP lan cable.
● [Cable length measurement] Measure cable length and locate fault distance accurately for lan cable. The cable type is CAT5e,CAT6,CAT6a(STP&UTP). The test range must be 2.5m~200m.
● [PoE Testing & Port Flash] Test the information of PoE device, such as PoE voltage, power supply polarity, power supply mode. It can also identify which the type of PSE (at/af standard) If it is standard PoE device. If it is no-standard PoE device, it only display “non-standard”. Locate network port by the flashing port light on Hub / Switch. Available to 10M/100M/1000M Hub/ switch.
